MAINTENANCE
36
Tennant T300e/T300 (02- 2016)
AFTER EVERY 50 HOURS OF USE
1. Remove the solution tank filter and clean screen
(Figure 106). Turn the filter bowl counter-clockwise
to remove. Make sure to drain solution tank before
removing filter.
FIG. 106
2. Cylindrical brushes - Rotate brushes from front to
rear (Figure 107). Replace brushes when they no
longer clean effectively.
FIG. 107
3. Cylindrical scrub head - Remove debris buildup
from underside of scrub head (Figure 108).
FIG. 108
4. Inspect and clean the seal on the recovery tank lid
(Figure 109). Replace seal if damaged.
FIG. 109
AFTER EVERY 100 HOURS OF USE
If machine is equipped with the optional battery
watering system, check the watering hoses and
connections for damage and wear (Figure 110).
Replace system if damaged.
FOR SAFETY: When servicing batteries, wear
personal protection equipment as needed. Avoid
contact with battery acid.
FIG. 110
ELECTRIC MOTORS
Replace motor carbon brushes as indicated. Contact
trained personnel for carbon brush replacement.
Carbon Brush Replacement
Hours
Vacuum motor
750
Propel motor (drive model)
1250
Disk brush motor
1250
Cylindrical brush motor
1250
Orbital brush motor
1250
