OPERATION
Tennant T300e/T300 (03- 2015)
15
4. To remove the pad driver(s)/brush(es), raise the
scrub head and press the yellow plunger button
with foot or hand (Figure 17). Pad will drop to floor.
FIG. 17
INSTALLING PAD - Orbital
For best cleaning performance and to avoid damaging
the pad driver plate or floor surface, always use backer
pad with work pads (Figure 18).
Backer pad
Work pad
Scrub head
Pad driver plate
FIG. 18
FOR SAFETY: Before leaving or servicing machine,
stop on level surface, turn off machine, remove key
and set parking brake if equipped.
1. Step down on the scrub head lift pedal to raise the
scrub head off the floor (Figure 19).
FIG. 19
2. Install the backer pad, retaining strips facing
outward, to bottom of scrub head (Figure 20).
Make sure pad is centered on scrub head.
FIG. 20
3. Attach the work pad to the backer pad (Figure 21).
FIG. 21
INSTALLING CYLINDRICAL BRUSHES
FOR SAFETY: Before leaving or servicing machine,
stop on level surface, turn off machine, remove key
and set parking brake if equipped.
1. Step down on the scrub head lift pedal to raise the
scrub head off the floor (Figure 22).
FIG. 22
