Phonecell SX4e Programming - continued
SX4e GSM 1900
42
U
SER
M
ANUAL
Enter Disconnect Pulse Option
Use the following key sequence to enter the disconnect pulse option:
Press:
#
*
79
*
<disconnect pulse> #
The disconnect pulse value is programmed in 1 millisecond increments
from
10
to
65
,
535
. A value of
0
disables the disconnect pulse. If the
value is not 0 or between 10 and 65,535, inclusive, it will be considered
invalid and the FWT will not update or store this value; the currently
stored value will remain. The factory default is
0
.
Enter Dial Tone Frequency Selection Option
Use the following key sequence to select the dial tone frequency
option:
Press:
#
*
80
*
<dial tone frequency> #
The dial tone frequency value is set to
0
to select the North American
dial tone frequency pair (350 + 440 Hz) ; set to
1
to select European
dial tone frequency (425 Hz). If the dial tone frequency selection option
value is neither 0 nor 1, it is considered invalid and the FWT will not
update or store this value; the currently stored value will remain. The
factory default is
0
.
E
nter Mobile Equipment Personalization Option
Use the following key sequence to enter the Mobile Equipment
Personalization (MEP) options:
Press:
#
*
37
*
<MEP lock type>
*
<MEP Operation>
*
<MEP Password> #
The MEP lock type value is set to 0 for SIM personalization;
1
for
Network personalization;
2
for Network subset personalization,
3
for
Service Provider personalization,
4
for Corporate personalization. If the
MEP lock type value is not in the range 0 to 4, it is considered invalid.
The MEP operation value is set to 0 to activate personalization;
1
to
deactivate personalization;
2
to disable personalization;
3
is reserved
for future use. If the MEP operation value is not in the range 0 to 3, it
is considered invalid. The MEP password is a special value available
only to authorized personnel. Factory default is all lock types set to
deactivated.
Operation and Maintenance Center Terminate Number
Use the following key sequence to program the operations and mainte-
nance center telephone number that the FWT receives calls from:
Press:
#
*
83
*
< number> #
If the number length is greater than 16 numeric digits, it will be considered
invalid. If no number is entered, the stored value is null. The factory default
is null.