SX4e GSM 1900
38
U
SER
M
ANUAL
User Programming Commands - continued
How To Set the Auto SEND Delay
Use the following key sequence to set the Auto SEND Delay:
Press:
#
*
11
*
<delay> #
The
< >
brackets represent the Auto SEND Delay. You must enter a
value between
2
and
20
seconds, otherwise the FWT will not update or
store this value; the existing stored parameter will remain.
(For
instance, to enter a 5-second delay, press: #
*
11
*
5.)
The factory
default setting is
3
seconds.
How to Set the Pulse Dial Option
Use the following key sequence to set the Pulse Dial option:
Press:
#
*
12
*
<pulse-dial> #
The
< >
brackets represent the
1-digit
Pulse Dial option:
enter:
0
to disable pulse dialing capability
enter:
1
to enable pulse dialing capability.
You must enter either
0
or
1
, otherwise the FWT will not update or
store this value; the existing stored parameter will remain. The factory
default setting is
1
.
Enable/Disable Zero Dial Delay for Frequently Called Numbers
Use the following key sequence to set the Zero Dial Delay option:
Press:
#
*
21
*
<zero-delay dial> #
The
< >
brackets represent the
1-digit
Zero Dial Delay option:
enter:
0
to disable Zero Dial Delay option
enter:
1
to enable Zero Dial Delay option
You must enter either
0
or
1
, otherwise the FWT will not update or
store this value; the existing stored parameter will remain. The factory
default setting is
1
.
Output Level Option
Use the following key sequence to program the nominal audio output
level:
Press:
#
*
69
*
<output level> #
The output level value is set to
0
for low (-20dBm),
1
for normal (-14dBm)
and
2
for high (-8dBm). If the output level value is greater than 2, it will be
considered invalid. The factory default is
1
.