SX4e GSM 1900
11
U
SER
M
ANUAL
Step 1. Antenna Location and Setup
The
Phonecell SX4e
comes with a dipole antenna.
Antenna Setup:
1)
Connect the antenna to the TNC
antenna connector on top of the
FWT
- see Figure 1.
2)
Connect power to the FWT
- see
the Connect the Power section
of this manual.
Wait for the unit to
acquire service.
3)
Check the LED cellular status
indicator
(middle LED)
on
the front of your Phonecell:
••
RED Continuous =
No Service
••
RED Flashing =
SIM Problem
••
GREEN Continuous
= Good signal.
••
GREEN Flashing
= Poor signal.
4)
Move the antenna from one
location to another until you
achieve the best signal
strength possible (GREEN).
5)
When you’re getting a strong
(GREEN)
signal, you’re ready for
the next step - connecting a phone
and making a call.
NOTE:
If you’re still receiving a
Continuous RED “no-service”
signal,
contact your service
provider to make sure cellular
service is activated.
If the LED is flashing RED, there’s
a SIM card problem
- see Step 5.
WARNING!
Never operate your Phonecell
when any person is within
8
inch
es
(2
0
cm) of the antenna.
!
Female TNC
Antenna
Connector
Standard
Dipole
Antenna
Figure 1
LED Cellular
Status Indicator