SX4e GSM 1900
34
U
SER
M
ANUAL
How to Make an Analog Fax Call
How To Make Analog Fax Calls
Analog (i.e. normal fax from fax machine) fax calls (CCITT Group 3, Bearer
Service TS 62) can be made from
phone
and
fax
jacks, depending on the option
set.
How to Send Fax Calls
Step by Step Fax Instructions
1. Set up your fax machine just as you would for a wired telephone.
2. Outgoing fax calls at the fax jack are processed directly. Outgoing fax
calls at the phone jack always require the analog fax bypass string,
since the default for this jack is voice calls. See the
User Programming
Commands
section of this manual for analog fax setup.
NOTE:
Make sure the fax machine is properly connected as shown in
Figure 7.
How to Receive Fax Calls
By factory default, you do not have to do anything to receive a fax, provided you
have set-up your fax machine as shown in
Figure 7
. However, the user can have
options to receive a fax through the phone port. Refer to the User Programming
section of this addendum for instructions on programming of the single jack option
and in-bound fax port option.
How to Set Up Analog Fax Bypass String
NOTE:
The analog fax bypass string can only be used in single jack operation.
This feature allows the phone jack to process the next outgoing call as an analog
fax call. After this call, the phone jack automatically returns to the default voice
protocol. The user enters this string prior to dialing the telephone number. The ter-
minal interprets the string and properly sets up the call. Refer to the following
examples.
To Send a Fax on a Fax Machine Connected to the Phone Jack:
1. Lift up the handset (take off-hook).
2. Dial
#
*
19
*
1 #
, followed by the fax number to be called.
3. Press
START
on the fax machine.
NOTE:
If the fax machine does not have a handset, enter
#
*
19
*
1 #
, followed by
the remote fax number to be called. Press
START
.
If the fax machine has the capability to store telephone numbers for speed dialing,
the
#
*
19
*
1 #
command string may be programmed into the machine as a pre-
fix to the telephone number. With some machines, it may also be possible to store
the command string as a speed dial number and dial the remote fax machine tele-
phone number manually.