SX4e GSM 1900
39
U
SER
M
ANUAL
Phonecell SX4e Technician-Programming Commands
The following commands are to used by trained field technicians to set up the
Phonecell SX4e for operation in the network. Since these commands can directly
affect the proper operation of the unit, there is an additional level of security to
prevent casual access.
How to Enter Technician-Programming Mode
Use the following access code to enter the Technician-Programming mode:
Press:
#
*
0
*
1 2 3 4 4 3 2 1 #
The access code is 8 digits. If the access code is not 8 digits or does
not match the access code, the Programming mode cannot be entered.
This code is pre-programmed during production and cannot be
changed in the field.
If you enter the access code correctly, the dial tone should change to a
different, steady “Programming” tone and the bottom LED indicator on
the front of the Phonecell will blink alternately RED and GREEN to indi-
cate that you are in the Programming mode.
Technician Programming Commands
Enter Dial Tone After Remote On-Hook Option
Use the following key sequence to enter the dial tone after remote on-
hook option:
Press:
#
*
8
*
<dial tone option> #
The dial tone value is set to
0
for no tone after a remote on-hook;
1
to
enable dial tone after remote on hook. If the value is neither 0 nor 1, it
is considered invalid. The factory default is
0
.
Enter Post Receiver Off-Hook Option
Use the following key sequence to enter the post receiver off-hook
option:
Press:
#
*
9
*
<post ROH option> #
The post ROH value is set to
0
for continuous ROH tone;
1
to disable
ROH tone and periodically check for an on-hook condition. If the post
ROH value is neither 0 nor 1, it is considered invalid. The factory
default is
1
.
Phonecell SX4e Programming - continued
IMPORTANT!
The following commands may be used by a trained service technician to change
the configuration of the Phonecell SX4e. WARNING: These commands are
intended for use by trained service technicians only. Untrained users could dam-
age the Phonecell SX4e, violate local regulations and breach the service agree-
ment with the cellular provider. For further assistance, please contact your
Authorized Telular Representative.
!