21
SMS request
Alarm mode is activated/deactivated when this type of SMS request is sent to device:
"psw<password> alarm on" – activate.
"psw<password> alarm off" – deactivate.
E.g.: psw0000 alarm on
When there is no password: alarm on.
Action On Call
Function is activated or deactivated when device receives a call. Action on Call function must be
set to Alarm on. (For detailed information look to Function activation on call).
Parking
Parking function is enabled. Alarm mode will be activated if device will leave parking zone. (For
detailed information look to dynamic Geo - zone function).
Man-down
Man – down function is enabled. Alarm mode will be activated if device will change its position
more than 45 degrees or logs fast movement.
(For detailed information see Man – down function).
Alarm mode function configuration is located in Track Assistant software:
Device configuration → Alarm tab
This is main Alarm configuration section. Configurable parameters are explained in a table below:
Parameter
Description
Alarm method
CALL
Device informs about alarm by cyclic call (see Call method).
GPRS
Device sends saved data to server using GPRS (see GPRS method).
GPRS or SMS
Device sends saved data to server using GPRS. If connection is not
possible, device starts sending SMS messages. Configuration is
same as described in GPRS or SMS method (see GPRS method,
SMS method).
