86
setparam # #
Set parameter value according entered ID and Value.
1.# - ID value.
2.# - New Parameter Value
Yes
flush
#,#,#,#,#,#,#
Initiates all data sending to specified target server
1.# - IMEI
2.# - APN
3.# - LOGIN
4.# - PASS
5.# - IP
6.# - PORT
7.# - MODE (0-TCP/1-UDP)
Yes
sn x [x=0;1]
Enable/disable static navigation
Yes
banlist
Banlist information
Yes
crashlog
Crash log information
Yes
delete_all_sms Delete all read SMS
No
braminfo
BatRam info
Yes
getgnss
Current GNSS information
Yes
getlvcanprog
CAN Program Number request by SMS
Yes
setlvcanprog # Set LVCAN program number
Yes
getlvcaninfo
Get LV-CAN info by SMS
Yes
13.1
getstatus
Table 29 getstatus
Response details
Description
Data Link
Indicate module connection to server at the moment: 0 – Not connected, 1
– connected
GPRS
Indicate if GPRS is available at the moment
Phone
Voice Call status: 0 – ready, 1 – unavailable, 2 – unknown, 3 – ringing, 4 –
call in progress, 5 – asleep
SIM
SIM Status: 0-ready, 1-pin, 2-puk, 3-pin2, 4-puk2
OP
Connected to GSM Operator: Numerical id of operator
Signal
GSM Signal Quality [0-5]
NewSMS
Indicate if new message received
Roaming
0 – Home Network, 1 – roaming
SMSFull
SMS storage is full? 0 – ok, 1 – SMS storage full
LAC
Location Area Code
Celll ID
Cell ID
Answer Example: Data Link: 0 GPRS: 1 Phone: 0 SIM: 0 OP: 24602 Signal: 5 NewSMS: 0
Roaming: 0 SMSFull: 0 LAC: 0 Cell ID: 0
