148
4.
Select No Pylynoms
Figure 118 COM port2 configuration
5.
In Profile1, Profile2, Profile3, Profile4 – enable required IO fields for LLS1 and LLS2
Figure 119 I/O element configuration
6.
Lower sensor adress will have ID:201 other ID:203.
c)
One or two sensors Level Calucualtion using Polynoms Values
1.
Under RS485 settings select LLS Mode
2.
Ensure Baudrate is 19200
3.
Select RS485 Multi Settings => Disable
Figure 120 RS485 configuration
4.
Select Setting With Polynoms