150
Example:
Send command “<USER> <PASSWORD> setparam 180 46” to set LLS with address 46 to
be LLS1. Effective when parameter “LLS RS485 Multi LLS settings” ID:179 is enabled.
LLS1, LLS2, LLS3, LLS4 and LLS5 IO elements IDs:
Name
IO ID
LLS1 Level
201
LLS1 Temperature
202
LLS2 Level
203
LLS2 Temperature
204
LLS3 Level
210
LLS3 Temperature
211
LLS4 Level
212
LLS5 Temperature
213
LLS5 Level
214
LLS5 Temperature
215
NOTES!
1)
If new device is connected, it should be done before powering up FM55 device because
FM55 searches LLS sensors at startup only.
20
GPRS COMMANDS
It is possible to send commands to FM5500 using GPRS. When FM5500 sends records
periodically to a server, a message could be sent from the server and FM5500 will reply to it.
FM5500 has to be connected to the server in order to receive commands.
Command
Description
#GET DATAORDER
Get info about records sorting parameter
#SET DATAORDERX=Y
Set records sorting parameter, X – profile, Y – value (0/1).
#GET RECTO
Get info about records refresh timeout parameter
#SET RECTO=X
Set records refresh parameter, X = records refresh timeout
#GET VERSION
Receive firmware version
#GET NETWORK
Get GSM operator to which device is connected
#GET IMSI
Get IMSI of the device
#GET OUT
Get DOUT values
#DO REPORT
Save a record
#DO RESET=XXX
Reset FM5500 or GPS module, XXX – FM5X or GPS
#GET ROAMINGX=Y
Get operator from the list of a certain profile, X – profile, Y – operator
number in a list
#SET ROAMINGX=Y,Z
Set operator to the list of a certain profile, X – profile, Y – operator
number in a list, Z – operator code
#GET REMIPX
Get IP and port number from the configuration of a certain profile, X –
profile
#SET REMIPX=Y:Z
Set IP and port number to the configuration of a certain profile, X – profile
no, Y – IP or domain, Z – port number
#GET AUPX
Get APN, user login and password from the configuration of a certain
profile, X – profile
