Teltonika FM1000 ST, User Manual, Page: 81 / 85

81
9.9.3 Full example of OBD parameter configuration:
To configure Engine RPM PID 0C(Hex)=12(Dec) for 1 th slot, you must send SMS command:
[login] [pass] setparam 2150 12
Then other parameters can be configured similar to I/O parameters : 2151 – Priority; 2152
– High level; 2153 – Low level; 2154 – Event type, 2155 – averaging length.
Example:
[login] [pass] setparam 2151 1
9.10 SMS event configuration
9.10.1 I/O#1 element SMS event configuration (ID=100)
Command sets SMS warning on I/O#1 element.
SMS Format: setparam X Y,W,Z;
X
– ID;
Y – Enable/Disable (0/1);
W – Telephone number INDEX (See 9.4.15 SMS Event Predefined Numbers paragraph , ID
150 – INDEX 1; ID151 – INDEX 2, … );
Z – SMS Text.
Example: “setparam 100 1,5,Digital Input 1 Event!”
Other I/O element SMS events can be configured in same logic. All I/O element SMS event
IDs are listed in the next table. OBD Iox (x – any number between 1 to 20) defines SMS event text
for configured OBD IO slot.
Element name (default
SMS Event Text)
ID
Digital Input 1 100
PDOP 101
HDOP 102
Power voltage 103
Movement 104
Trip Distance 105
Actual operator Code 106
GPS speed 107
Operating Mode 108
GSM Signal 109
Deep Sleep 110
Cell ID 111
Area Code 112
Battery Voltage 113