29
Phone numbers have
to be written in international standard, without using “+”
or “00”
signs in prefix. If no numbers are entered, configuration and sending commands over SMS are
allowed from all GSM numbers.
SMS data sending settings
–
enable or disable
panic
event SMS usage. This setting does not
affect replies to SMS request messages
–
answers are always sent back to sender telephone
number.
Also functionality
Location by call
is configured in this field. User can select what to do with
incoming call: Do nothing (default), Just hang up, Hang up and report with SMS. Sent SMS is ggps
SMS format. If Authorized numbers list is used, location SMS would be sent only to authorized
number. If Caller in not in authorized User List - position SMS would not be sent.
Figure 16 SMS configuration
Note: A mobile phone will not understand SMS with binary code, so sending it
to a mobile phone is useless. When sending a binary SMS to a phone number,
which is a server phone number, the server can interpret and understand
binary code, so the data can be read and you can view it on the server.
SMS login and password and authorized number list are used to protect
FM1000 module from unauthorized access. Module accepts messages only
from a list of authorized numbers and with proper module login and password.
Location by call feature also check authorized numbers list. Numbers must be
without “+” or “00” prefix. If no authorized numbers are entered, module
accepts messages from all numbers.
5.10.3
SMS Events
SMS events functionality allows FM1000 to send a configured SMS when an event is
triggered. This event can be triggered by scenarios, trip, geofencing, autogeofencing, I/O, OBD
events.