To Place a Call
Step 1: Call the M-106E
•
Dial the M-106E assigned telephone number:
___________________________________
❏
With answer tone and password enabled:
•
You will hear a 2-second tone.
•
Enter the password, followed by # within 15 seconds after the tone ends.
You will hear dial tone if the password is accepted.
❏
With answer tone disabled and and password enabled:
•
Wait three seconds after the unit answers and enter the password,
followed by #, within 15 seconds. You will hear dial tone if the password
was accepted.
❏
With password disabled:
•
You will hear dial tone upon accessing the unit.
Step 2: Complete the call
•
When you hear dial tone, you can place a call. if dial tone persists and the
call does not go through, attempt the call again. If the call still does not go
through, the M-106E may require a change of configuration, or
transmission losses prevent the use of the M-106E from your remote
location.
Appendix 6: User Quick Reference
106E-101, Issue 1
Page 61
