TP-8/16/24/32/64S User Manual Version No.: V1.2
- 78 -
The parameter only can be “pf0”, pf1”or “pf2”. “save as pf0” means there is no any parameter for this
command. The command is used to save the configured values of the all current parameters into the
different parts of Flash. For example:
system> save as pf1
Parameters loading command
system> load {parameter}
The parameter only can be “pf1”, pf2”, df1” or “df2”. “pf1” and pf2” means two places of the memory,
with two sets of default configured values saved, which are not allowed to be changed by users. The
command is used to load the configured values in the Flash or memory as the current configured
values. For example:
system> load pf2
Testing command
system> test {parameter}
The parameter only can be ring, connect, playtone {parameter}, loop or gr909{ parameter }. Therein,
the parameter of playtone only can be Silence, dial, ringback, busy, callwaiting or howler; and the
parameter of gr909 is Channel No.
system> timezone
This command is set by way of interaction, and does not need any parameter. After carrying out the
command, CLI will display the time zone set currently and require new time zone to be entered.
Negative number means east time zone, positive number means west time zone. For example, China
locates at east time zone 8, UTC offset [-8].
During setting, users button enter key to keep the original port settings, and button “Ctrl
＋
C” to
cancel the setting.
Command to display software and hardware version numbers
system> version
It has no need of any parameter. After the command is performed, CLI will display the following
information:
Hardware Version: … …
Software Version: … …
Created Time: … …
“Hardware Version” and “Software Version” refer to the version number of hardware and software
respectively, and “Created Time” refers to the software compilation time.
Exit command
system.> exit [parameter]
Help command
system.> help [parameter]
