TP-8/16/24/32/64S User Manual Version No.: V1.2
- 77 -
Memory status display command
system> mem
This command does not need any parameter. It is used to display the current memory status of the
system.
Network connectivity test command
system> ping {parameter}
The parameter is the IP address planned to be tested, for instance:
system> ping 192.168.1.1
Users can button “Ctrl
＋
C” to get out of the command.
Protocol mode setting command
system> protocol {parameter}
The current protocol type will not be listed into the parameter reminding list. For example:
system> protocol h248
Progress information display command
system> ps
This parameter has no need of any parameter. It is transplanted into ps command of busybox and used
to display related information of current each progress of the system. For instance:
PID TTY TIME CMD
9930 pts/2 00:00:00 bash
19587 pts/2 00:00:01 Init315
19588 pts/2 00:00:00 Init315
19589 pts/2 00:00:00 cli
19967 pts/2 00:00:00 ps
Manual-registration endpoint command
system> regep
This command is adopted to manually open the endpoint of the forbidden NGN business, and then the
endpoint will be used to register at MGC once more. The usage of the command is similar with 2.4.4.
Routing table display command
system> route
This parameter has no need of any parameter. It is transplanted into the route command of busybox to
display current route setting state of the system, but it has no configuration function.
Command to save and load parameters
Parameter saving command
system> save
or
system> save as {parameter}
