Telos Zephyr Xstream, User Manual

Page: 55 / 381

USER’S MANUAL
Section 3: GUIDED TOUR of the HARDWARE 43
then the lower ‐ case letters, then the number 2. Enter a space by pressing 1 three times.
Punctuation characters appear on the * and # keys. The period “.” is one the # key.
For example:
Press the number 2 once ...... See the character A
... press it again ...... See the character B
... press it again ...... See the character C
... press it again ...... See the character a
... press it again ...... See the character b
... press it again ...... See the character c
... press it again ...... See the numeral 2
... press it yet again ...... the cycle starts again from A
To move to the next character in a field, tap any other key or press the <
6
> button. To back up
(delete), press the <
5
> key.
AUTO
,
DIAL
, &
DROP
Keys
These keys will be covered in greater detail in Section 4.2 (Basic Installation & Operation).
AUTO
The <AUTO> key allows access to Zephyr Xstream’s 100 stored Dial Setups (#00
to #99). These can be accessed by pressing < AUTO >, entering two digits, and
then pressing < AUTO > again.
It can also be used to access the 30 Location Setups (#100 to 129) can be
accessed to configure the ISDN settings for frequently visited locations. Press
and hold the <
6
> key to jump to the Location Setups . Or, press <AUTO> enter 3
digits and press <AUTO> again.
DIAL
The <DIAL> key is used to manually dial a number. Press, <DIAL>, enter the phone number and
press <DIAL>. To redial the last number dialed simply press <DIAL> twice.
DROP
The <DROP> key is also straightforward in its most basic form. Pressing <DROP> twice will drop
any call on “Line 1”. If “Line 1” is idle, it will drop any call on “Line 2”. Therefore, pressing
<DROP> four times will clear both lines. Of course you also have the option of choosing a
specific line to drop.