Telos Omnia ONE Multicast Installation And Operation Manual Download | Manualshive

Page: 13 / 61

background image

HAZARD / WARNING LABELS

The Exclamation Point
symbol, within an
equilateral triangle, alerts
the user to the presence of
important operating and
maintenance (servicing)
instructions in product
literature and instruction
manuals.

The Lightning Flash With

Arrowhead symbol, within an

equilateral triangle, alerts the

user to the presence of non-

insulated dangerous voltages

within the product's enclosure

that may be of sufficient

magnitude to constitute a

risk of electric shock.

WARNING -- This equipment generates, uses, and can radiate radio frequency energy. If
not installed and used in accordance with the instructions in this manual it may cause
interference to radio communications. The device has been formally submitted for testing
and found to comply with the limits for a Class B computing device (pursuant to subpart
J of Part 15 FCC Rules) and has been designed to provide reasonable protection against
such interference when operated in a commercial environment. Operation of this
equipment in a residential area may cause interference, and the user and at his expense
will be required to take any measures required to correct interference.

CANADA WARNING – This digital apparatus does not exceed the Class B limits for
radio noise emissions set out in the Radio Interference Regulations of the Canadian
Department of Communications. Le present appareil numerique n'emet pas de bruits
radioelectriques depassant les limits applicables aux brouillage radioelectrique edicte par
le ministere des Communications de Canada.

OmniaONE Multicast - Use and Operation Manual – Version 0.90

13

«
...
11
12
13
14
15
...
»

Summary of Contents for Omnia ONE Multicast






























































Reviews:

No comments

Related manuals for Omnia ONE Multicast

Brand: miniDSP Pages: 17

Brand: Ampro Pages: 28

Brand: Barco Pages: 9

DVI-SPLITPRO-2X

Brand: Avenview Pages: 24

Brand: THORLABS Pages: 17

Brand: Gaoke Pages: 12

Brand: Waring Pages: 27

Brand: Garland Pages: 156

Brand: GE Pages: 12

Brand: KitchenAid Pages: 96

Brand: Vitek Pages: 32

Brand: Coline Pages: 5

Brand: BZB Gear Pages: 16

Brand: Viking Pages: 24

Brand: Dukane Pages: 8

Brand: MAX STAR Pages: 5

Brand: MAX STAR Pages: 5

Brand: miniDSP Pages: 51

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands