23
5.4 Inputs and outputs
Available options:
: read the settings from the module
: write the settings into the module
: save the settings to file
: load the settings from file
5.4.1 Inputs / Events
By activating the inputs IN1…IN4 the system can send notifications by SMS or e-mail to the
specified phone numbers or email addresses.
Input type
: the input can be normally open (
NO
), or normally closed (
NC
). When set to
NO
,
event is generated when the input is closed, while when set to
NC
, opening the input
generates an event. The input is closed when the given input IN1…IN4 is shorted to „V-”
terminal (DC power negative).
Special input functions available when using the system with the smartphone application:
IN1: doorbell notification function (via Push notification)
IN2: technical error notification function (via Push notification)
IN3: gate position limit error notification (via Push notification) on the gate controlled by
output OUT1
IN4: gate position limit error notification (via Push notification) on the gate controlled by
output OUT2
You can read more about these functions in the „
General operation of the GSM Gate
Control Pro / Operation of the contact inputs
” chapter.
Sensitivity
: input sensitivity specified in seconds. State changes of the input shorter than
the entered value are ignored by the system.
