18
System time synchronization:
The system time should be synchronized only if connecting to the server is disabled,
else the time is synchronized automatically from the server. To synchronize the time,
click on the “
Time synchronization
” button. The software synchronizes the time to
the PC system time, therefore please check before proceeding if the PC system time is
correct.
Send test e-mail:
This button can be used to check if the e-mail sending function works. To send a test
e-mail, click on the button, enter the e-mail address or select one from the drop-down
menu and click o
n the “
Send
” button. If the test e-mail is not received, check the
“
Internet access
” and “
Outgoing e-mail account
” settings.
5.3.1 Identification
Device name
: here you can give a name to your
Gate Control Pro
module, which name
will also be used in the reports.
Attention! The following characters should not be used: ~ ^ < > =
’ ” , | $ &
Phone number
: enter the phone number of the SIM card inserted in the
Gate Control Pro
module. This is used in the smartphone application for backup GSM calls and for SMS
sending during the smart device registration process.
PIN code
: if you wish to use PIN code management, enter here the PIN code of the
SIM card installed into the module. Otherwise disable PIN code request on the SIM card.
If you have configured the wrong PIN code and therefore the module is unable to connect to
the GSM network, it might happen that the SIM card reaches the PUK code request stage.
In this case install the SIM card into a cellphone, unlock it by entering the PUK code and
correct the PIN code at the module’s settings.
5.3.2 Internet access
If you wish to use the Internet-based services of the system, it is necessary to configure the
settings needed for accessing the Internet, and it is also necessary to use a SIM card with
available mobile internet service in the
Gate Control Pro
module.
APN
: the APN name necessary to connect to the internet. (ask for this at the GSM service
provider of the SIM card inserted in the
Gate Control Pro
module).
User name
: necessary only if the GSM service provider provides this and requires its usage
for the given APN.
Password
: necessary only if the GSM service provider provides this and requires its usage
for the given APN.
