WE866 HW User Guide
1VV0301330 Rev. 3
Page
16
of
54
2018-03-13
Warning – Reserved pins must not be connected.
Warning – VDD output must not be used to supply any device on the
customer application.
It is only provided as reference/supply voltage when voltage translation
to 1V8 CMOS is needed.
When its use is necessary, it is strongly recommended to connect
VAUX through a series resistor as closed as possible to the module in
order to reduce the inrush current of the internal DC/DC supply. Use a
low value resistor (e.g. 10 ohm, 1/3W) with a maximum power rating
to drained current.
Summary of Contents for WE866
Page 1: ...04 2016 Mod 0805 2016 08 Rev 5 WE866 HW User Guide 1VV0301330 Rev 3 2018 03 13 13...
Page 10: ...WE866 HW User Guide 1VV0301330 Rev 3 Page 10 of 54 2018 03 13 Related Documents...
Page 33: ...WE866 HW User Guide 1VV0301330 Rev 3 Page 33 of 54 2018 03 13 7 MECHANICAL DESIGN Drawing...
Page 54: ...04 2016 Mod 0805 2016 08 Rev 5...
