background image

56050801 - Rev B

ii

© 2017 Telguard

Repair and Warranty

If you experience trouble with the

Telguard Cellular Alarm Communicator

please contact Telguard Technical Support for trouble shooting, repair
and (or) warranty information. The dealer or end user should not
attempt any repair to

the Telguard Cellular Alarm Communicator

. Repair

of this equipment should only be referred to qualified technical
personnel.

Telguard will repair or replace (our option) inoperative units for up
to two years from date of manufacture. This excludes damage due to
lightning or installer error. Unauthorized modifications void this
warranty.

Not responsible for incidental or consequential

damages.

Liability is limited to price of unit.

This is the exclusive

warranty and no other warranties will be honored, whether expressed or
implied.

An RMA must be assigned before returning product. You may obtain an RMA
via phone at 800-229-2326 option 1, or via email at

[email protected]

.

Note: RMA number must be on the outside of box or product will not be
accepted.

Future Testing and Limitations on Use

The Telguard TG-1 is part of an advanced design alarm communication
system.

It does not offer guaranteed protection against burglary and

fire.

Any alarm communication system is subject to compromise or

failure.

The Telguard unit will not work without power.

Electrically powered

devices will not work if the power supply is off for any reason,
however briefly.

The cellular radio network, needed to transmit alarm signals from
protected premises to a central monitoring station, may be inoperable
or temporarily out of service.

Cellular radio networks are also

subject to compromise by sophisticated methods of attack.

This equipment, like any other electrical device, is subject to
component failure.

Although this equipment is designed to be long

lasting, the electrical components could fail at any time.

Due to these limitations, we recommend that if the automatic self-test
feature is not enabled, other arrangements be made with the user to
test the system at least once every three months.

Moreover,

arrangements should also be made for on-site inspection/test by a
licensed alarm installer at least once each year.

Terms and Conditions for Use of Telguard Product

These Terms and Conditions are a legal contract between you and
Telguard for the title to and use of the Product.

BY RETAINING AND

USING THE PRODUCT YOU AGREE TO THE TERMS AND CONDITIONS INCLUDING
WARRANTY DISCLAIMERS, LIMITATIONS OF LIABILITY AND INDEMNIFICATION
PROVISIONS BELOW.

IF YOU DO NOT AGREE TO THE TERMS AND CONDITIONS, DO

NOT USE THE PRODUCT AND IMMEDIATELY RETURN THE UNUSED PRODUCT FOR A
COMPLETE REFUND.

You agree to accept sole responsibility for any

misuse of the Product by you; and, in addition, any negligent or
illegal act or omission of your or your agents, contractors, servants,
employees, or other users of the Product so long as the Product was
obtained from you, in the use and operation of the Product.

Summary of Contents for TG-1 Express CDMA



























Reviews: