![background image](http://html1.mh-extra.com/html/telguard/tg-1-express-cdma/tg-1-express-cdma_installation-manual_1083406014.webp)
56049201
6
© 2016 Telguard
Radio Failure Condition (RFC)
Radio communications failure condition (RFC) is declared when the Telguard
TG-1 Express is unable to transmit over the cellular network even with
acceptable signal strength. RFC is indicated by the STC LED flashing 5 times.
RFC is cleared when communication with the TCC is restored.
Panel Presence Failure (PPF)
Panel presence failure (PPF) is declared when the Telguard TG-1 Express is
unable to detect the presence of the host alarm panel. PPF is indicated by the
STC LED flashing 7 times. PPF is restored immediately after the connection
to the panel is restored and maintained for the delay period.
Dial Tone Failure (DTF)
The Telguard TG-1 Express provides a voltage supply and other signaling to
the panel similar to a telephone central office. A Dial Tone Failure (DTF) is
declared when unable to provide proper telephone signaling to the panel. The
STC LED will flash 6 times and the STC relay will trip. This condition
requires contacting Technical Support for resolution.
Catastrophic Failure (CF)
Catastrophic Failure (CF) is any condition that causes the Telguard TG-1
Express to stop functioning at all levels, most commonly because of power
failure. The STC trip output is activated and visible indication is loss of all
LED activity. If power is connected properly to the unit when a CF occurs,
please contact Telguard Technical Support for resolution.
HomeControl Flex
The feature comes as an added service that provides the flexibility of remote
arming/disarming of the panel and end-user notification of events.
The HomeControl Flex service can work in conjunction with any single-
partition security system provided the alarm panel and Telguard are wired
properly and that the panel can be programmed with the following:
Alarm reporting format must be programmed to Contact ID.