56049201
10
© 2016 Telguard
Getting Ready
The Telguard TG-1 Express can only be activated when all the necessary
accounting information has been entered into the customer database located at
the Telguard Communication Center. The database includes information about
the customer account, unit location, and system test plan information.
Dealer Account Establishment
Prior to registration of any Telguard unit, a Dealer Account must be
established. Once the Dealer Account has been submitted and approved by
Telguard, a Telguard online service registration form may be submitted.
Establish your Dealer Account by completing the Online Telguard Cellular
Service Dealer Account Application at
www.TelguardOnline.com
. Once the
application has been completed you will receive an acknowledgment within 1
business day or sooner. This is a one-time event; the acknowledgment from
the Telguard Customer Service will include a Dealer Account Number that
will be used for all Telguard registrations.
Pre-Installation Checklist
Before attempting to connect the Telguard TG-1 Express to the host alarm
panel, please note the following:
Be sure you have all the proper parts before you go to the job site. The
following items are shipped with each Telguard unit:
Basic Telguard TG-1 Express unit, with antenna.
Telguard TG-1 Express Quick Install Guide
You must also have certain installation test tools:
A standard telephone or lineman's butt-set is required at the job site
for testing the unit.
Screws and a screwdriver will be required to attach the unit and
antenna to the wall.
In order to connect the STC relay outputs to the alarm panel,
stranded electrical wire will be required. The terminal strips can
accommodate solid or stranded wire sizes from 14 to 22 gauge.
A standard RJ31X-to-spaded leads cable will be required to connect
the Telguard TG-1 Express to the panel. These are usually supplied
with the alarm panel.
