56049201
12
© 2016 Telguard
Installation
Summary
There are six steps in installing Telguard properly. IF YOU DO NOT
PROCEED IN THE ORDER AND MANNER PRESCRIBED, YOU MAY
NOT COMPLETE THE INSTALLATION IN THE TIME ALLOCATED.
These six steps are summarized below and then explained in detail in the
remainder of this manual.
1.
Register for Telguard service
2.
Locate Unit and measure signal strength
3.
Activate and transmit alarm panel alarms
4.
Connect supervisory trip outputs
5.
Connect trip input (optional)
6.
Complete installation
This six-step installation approach provides the alarm installer with the easiest
and fastest method of properly installing your Telguard TG-1 Express. Please
follow the instructions carefully and if you should need assistance or have any
questions, call Telguard TECHNICAL SUPPORT at 1-800-229-2326 option
9.
Step 1: Register the Telguard Unit for Service
The registration form must be completed before leaving for the job site to
install the Telguard product. The registration form may be completed by:
Online Web Portal –
www.telguardonline.com
Online Form –
www.telguard.com
Note: Service registration requests are available 24/7 using
TelguardOnline. Online form submissions take 30 minutes after
receipt of the registration form during Telguard business hours.
The desired features and programmable options for any installation are
selected during the registration process. This includes STC strategy, Trip-
Input enabling, and added value services like HomeControl Flex.
