Televes H45 Compact User Manual Download Page 110

Page: 110 / 140

Analyzer

110

3.3.4.2.- Span

Using this function one can

vary the range of frequencies represented in the spectrum

. The

information for selecting this parameter appears at the lower right of the screen. Just as in the
previous case, the information on the selected measure disappears momentarily, being
replaced with the information on the span.

The different options for this parameter will appear on turning the

or pressing

On pressing key

, the selected span is validated, and the selected measure

reappears.

The selectable values are:

15, 10, 20, 50, 100, 200, 500, SPAN FULL

If the menus are hidden, you may use the cursor keys to directly reduce or
increase the span.

Summary of Contents for H45 Compact













































































































































Search results

Summary of Contents for H45 Compact

Reviews:

Related manuals for H45 Compact

Brands by name

Popular brands

Televes H45 Compact, User Manual

Search results

Summary of Contents for H45 Compact

Reviews:

Related manuals for H45 Compact

Brands by name

Popular brands