Televes H45 Compact User Manual Download Page 55

Page: 55 / 140

Measures Config.

- Terrestrial

- BER DVB-T/T2 (DVB-T2 only 599021, 599024, 599025)

- DVB-S

- DVB-S2

When a Terrestrial scan is taking place the

BER DVB-T/T2 (DVB-T2 only 599021, 599024,

599025)

option can be on. In this case as well as the Power and C/N parameters it also

measures the

corresponding BER parameters.

The column on the left allows one to select the

search range

at which the

SCAN&LOG

will start

to measure the different channels. To change this range we must press

over the search

range (TERRESTRIAL and SATELLITE) and with the

we can enter a value between

and

120

dBµv or the

OFF

value to deactivate the function. There is a separate search range for

terrestrial bandwidth and satellite. This range is also used in the manual search function, using

the key.

Search Range -

Turning off the

BER DVB-T/T2 (DVB-T2 only 599021, 599024, 599025)

option enables

a faster analysis of the terrestrial bandwidth.

Summary of Contents for H45 Compact













































































































































Search results

Summary of Contents for H45 Compact

Reviews:

Related manuals for H45 Compact

Brands by name

Popular brands

Televes H45 Compact, User Manual

Search results

Summary of Contents for H45 Compact

Reviews:

Related manuals for H45 Compact

Brands by name

Popular brands