Televes H45 Compact User Manual Download Page 91

Page: 91 / 140

Mode

3.3.3.2.2.2.3.- MPEG (599021, 599024, 599025)

Clicking on this option when the DVB-T2 signal is available will activate MPEG decoding.

When this option is selected, MPEG2 and MPEG4 services can be decoded.

H45 technology enables you to get services of up to 1080p and is compatible with audio
standards: AAC, EAAC and AC3.

Using the rotary switch, you will be able to access the list of channel services. When the desired
service has been found, press OK to confirm the selection. Then, if the service has multiple
audio channels available, select the desired channel.

This option offers three different information windows: one small and two extended. Using the
hotkey 1, you can select the view of your choice.

- DVB-T2 MPEG -

Summary of Contents for H45 Compact













































































































































Search results

Summary of Contents for H45 Compact

Reviews:

Related manuals for H45 Compact

Brands by name

Popular brands

Televes H45 Compact, User Manual

Search results

Summary of Contents for H45 Compact

Reviews:

Related manuals for H45 Compact

Brands by name

Popular brands