22
6 .6 .2 . DVB-T Scan
To receive DVB-T programmes, you must first perform a scan, as the receiving frequen-
cies are dependent on your location
>
Press the Menu key to go to the main menu . Use the arrow keys up/down to
select the menu item „Installation“
>
Use the arrow keys up/down to mark the line „DVB-T Scan“, confirm by pressing
OK
The menu „DVB-T Scan“ will be opened .
6 .6 .2 .1 . Auto Scan
We recommend you use the automatic scan during initial installation, as well as generally
when you are not searching for a specific programme . All available channels will be scan-
ned for programmes
>
In the menu „DVB-T Scan“ press the
red
function key
A window displaying scan options will be displayed .
>
Under „Scan mode“ you can now use the
arrow keys left/right
to select which
programmes the receiver should scan for (FTA or All)
>
In the line „Antenna Power“ you can switch the antenna feed for an active anten
na on the receiver on or of . In this regard, please inform yourself concerning the
specifications of the antenna connected
>
When you have entered all the settings, press the
OK
key to start the scan
When the scan procedure has been completed, the programmes found will be displayed .
A query will be displayed, enquiring whether you wish to save the programmes
>
Use the arrow keys up/down to select OK in order to save the programmes
Or Abort to discard them .
>
Confirm by pressing OK .
BDA TD 2220 HD-Lengl_07_12.indd 22
20.07.12 13:50
