15
>
Confirm by pressing
OK
.
Should one or more of the satellites that can be received by your installation not be in-
cluded in the list, new satellite positions can be added under the menu item „Satellite list“
(see Chapter 6 .2) .
6 .1 .2 . LNB Type
In this item, you can use the
arrow keys left/right
to select the type of LNB used to
receive the satellite position .
6 .1 .3 . LNB LOW / LNB High
Here you can use the numeric keys to set the IF frequencies for the High and Low Band
specific to the LNB .
6 .1 .4 . 22 KHz
The 22 KHz switch is used for controlling satellite installations, e .g . to switch between the
High and the Low Band . Use the
arrow keys left/right
to switch the 22 KHz signal on, off
or to the Auto setting .
6 .1 .5 . DiSEqC
In this field, use the
arrow keys left/right
to set the satellite position the antenna is direc-
ted at via DiSEqC . This setting is dependent on the satellite reception installation and its
individual components .
BDA TD 2220 HD-Lengl_07_12.indd 15
20.07.12 13:50
