2.
The telephone dials out the first of the entered emergency numbers (stored in the phone book
emergency location1) in speakerphone mode, and then begins playing the emergency message.
If during the period the emergency message is played (if available to the called party), called party
can acknowledge the call by pressing
0
, the telephone will be put in speakerphone operation for 1
minute. After 1 minute, the phone beeps loudly for 7 seconds. If within these 7 seconds, the called
party presses a numeric key on the phone, the unit will be kept in speakerphone mode for 1 additional
minute continuously without stopping. If any numeric key on the phone is not pressed pressed during
the 7 seconds, the call to the called party is disconnected.
Note:If 0 is not pressed during the period the message is played, the next emergency number in the
sequence will be dialed automatically in speakerphone mode.
To Store a Number in hotkey
(User programmable)
The phone is equipped with an emergency hot key. This # can be programmed with the telephone
number of the police or any other emergency number for this button.
This button is not part of the phone book. It is a quick dial telephone number that when depressed simply
dials the telephone number
1. Press and release the
MENU
button until the
STORE NUMBER
is shown.
2. Press the
OK
button. The cursor will flash in the first position.
3. Enter the required telephone number with a maximum of 22 digits using the number pad and confirm
with
OK
button.
4. Press
button.
5. Press
OK
button to confirm. The number has now been saved and display show
SAVED!
.
6. Repeat step 2 to 5 to store other numbers for other memory buttons or press
DELETE
button to exit.
To dial the the entered #, simply pick up the handset or press
SPEAKER
button and press
button
.
Note: The number stored in this location is for manual dialing only and will not be dialed
With the emergency help feature unless the # is also entered in the phone book and when entered is
programmed in as an emergency no. and a specific location.
THE CALLER ID
At each incoming call with available Caller ID, the telephone will ring and announce the caller with their
name (if entered in phone book with name recording and matching last 7 digits of incoming phone no.
shown on LCD display), if available, or with a voiced telephone number if available.
Important:
When using the Caller ID features, please note it is only available at Caller ID mode
(CLIP icon turns on). If the CLIP icon on LCD display is off, press (Exit) button once.
Please note that all Caller ID features are strictly related to the service provided by the provider
of your telephone services. It is necessary to subscribe to the Caller ID service supplying service
to your home to have the features of who is calling (Phone book of ClearVoice unit) or telephone #s on
incoming calls. Even if you don’t have Caller ID service you can enjoy the many features, since if you have an
answering machine, you can hear who is calling and decide to pick up call if you desire.
If the telephone is connected to a PABX the caller ID features depend on the PABX.
The Caller ID feature is only possible with the unit powered by the 120V AC power supplied to your unit
through the AC Adaptor enclosed with your unit or by the backup batteries in case of power failure(s) for
a total time of up to 6 hours of battery failure time.
19
Summary of Contents for ClearVoice 100 B
Page 24: ......
