USING FEATURES OF YOUR TELEPHONE THAT DO NOT NEED PROGRAMMING
Notes: To program names and #s for the featured Phone Book and Emergency Help System as well as add’l
programmed features proceed to section:
SETTING UP TO USE THE PROGRAMMABLE FEATURES OF YOUR
UNIT
Before proceeding, move speaker phone control on side of unit to mid-position.
Ringer Volume Control
The ringer sound level can be adjusted by sliding the RINGER switch located on the side of the unit to
select high (HI),
mid (MID) and low (LO) level.
The red bright LED on front of unit will flash with all incoming calls.
The red bright LED, located on rear of unit will light if you have Caller ID and have not answered 1 or more calls
Handset Volume Control/Tone Receiving Adjustment
The HANDSET volume control located under the handset enables user to adjust the amplification of the
call which can result in a more comfortable listening level. To turn on this amplifier after you pick up
the handset…press red
button on telephone for 1 second and release,
LOUD
LED display will now be lit.
Move handset volume control located under handset to desired amplification. Move TONE level, located on side of unit
to desired level. Your unit is now set to your desired level as long as the settings are kept. Each time you hang the
handset up, the amplifier will go OFF. Each time you pick up the handset, simply press the red
button for 1 second
to turn on the amplifier. To turn off amplifier and tone level simply press the red
button for 1 second. LOUD LED will
go OFF
Dialing a Call
1. Pick up the handset or press
SPEAKER
button (the speaker LED will light) and wait for a dial tone.
2. Press the keypad for the telephone numbers you wish to dial. The display will show the number that
you dialed on the keypad. If you dial a number over 14 digits long, it will show the last 14 digits only.
3. When you have completed your call, hang up the handset, or press
SPEAKER
button again.
To switch from a handset conversation to a speakerphone conversation .... press the
SPEAKER
button
and hang up the handset. To switch from speakerphone to handset, simply pick up handset.
Pre-Dialing a Call (Hearing each digit entered before dialing)
1. Dial on the keypad the telephone number. The telephone will voice the digits dialed (with voice option
ON). To correct a number press the
DELETE
button for each incorrect digit.
2. Press
SPEAKER
button and telephone # will be dialed.
Receiving a Call
When you receive a call, the telephone rings, the Ringer LED flashes and the display shows the CALL#
and the caller telephone number, and will state the name of the caller if the TELEPHONE # matches with a
name recorded in the phone book*, if not, it will say the numbers of the calling party if available (Caller ID
service required). Caller ID service required to detect Call# and/or name of caller.
This feature allows you to decide to pick up the phone or not depending on who is calling.
If you want to talk to the caller:
1. Pick up the handset or press
SPEAKER
button to answer the call.
2. At the end of the call, return the handset to the cradle or press
SPEAKER
button again to disconnect..
Receiving a Call/Remote Speakerphone (ClearVoice 100B and 200B)
Simply press the red button on the pendant for 1 second to connect to an incoming call and
activate its speakerphone, if you hear the phone and you are within range, but can’t get to the telephone.
To terminate the call, press the red button until you hear a Beeptone from your ClearVoice unit.
Note: An important feature is included that if the speakerphone was activated with the wireless pendant and you forgot
to hang up, After 30 minutes, the phone will beep for 7 seconds. If within these 7 seconds the called party (if still
connected) presses any numeric key on the phone, the unit will be kept in speakerphone mode conversation can
continue for 30 additional minutes. If no numeric key on the phone is pressed during the 7 seconds, the telephone will
deactivate the speakerphone and hang up, unless you pick up your handset on the ClearVoice unit to continue.
Note:This convenience feature is particularly useful if you are sitting on a couch, busy doing something else,
can’t get to the phone on time and don’t want to miss the call.
9
Summary of Contents for ClearVoice 100 B
Page 24: ......
