Programming Pause Timing
A Pause time between 1.0S to 5.0S can be programmed into memory.
This function provides a delay timing for systems that require different
delay times and allows the user to delay the dialing pattern of a number
when stored into memory. This function may be required for accessing
line features provided by your PBX provider. A speed dial number may
need to pause during its dialing sequence to ensure proper connections.
Pause timing can be programmed for different timing options listed below.
1. Press the “STORE” key to enter the programming mode.
2. Press the “STORE” key multiple times until the LCD display reads
“PAUSE TIME:3.6S”.
3. Enter the pause timing to be stored into memory using the keypad by
pressing the following keys on the keypad in the order shown. The key-
pad entry will be displayed on the LCD Screen.
Four Examples:
For 2.0S press "2" "0" on the keypad.
For 2.1S press "2" "1" on the keypad.
For 3.2S press "3" "2" on the keypad.
For 4.9S press "4" "9" on the keypad.
4. Press the “STORE” key to enter the new pause timing value.
5. To exit the program mode, press “DISC” or continue to the end of pro-
gramming by pressing the “STORE” key multiple times until the display
reads “All Setup OK”.
PAUSE TIME:3.6S
12/01
PM
12:00
PAUSE TIME x.xS
Set up pause timing 1.0S
to 5.0S. Default 3.6S.
26
NOTE: If you require a pause time delay longer than the maximum setting of 5.0S,
stack the pauses within the dialing pattern to achieve the longer timing.
!
Summary of Contents for Spectrum Plus LP550
Page 2: ...This page is intentionally left blank...
Page 6: ...TOP PANEL 6...
