Telematrix Spectrum Plus LP550, User Manual

Page: 23 / 52

Programming Voice Mail
To program the Spectrum PLUS
TM
one touch “MESSAGE WAITING” speed dial
key, follow these programming instructions.
Programming Voice Mail Dialing
1. Press the “STORE” key to enter
programming mode.
2. Press the “STORE” key multiple times
until “VOICE MAIL NO.” is displayed on
the LCD screen.
3. Enter the voice mail number. The area
code is not required if AREA CODE is
programmed into memory.
4. Press the “STORE” key to store the
voice mail number into the VOICE MAIL
memory key.
5. Enter the “PIN NUMBER”, up to 8 digits.
The PIN characters will not be dis-
played.
6. Enter the “SECONDS OF WAIT?”, up to
99 seconds.
7. To exit the program mode, press
“DISC” or continue to the end of pro-
gramming by pressing the “STORE”
key multiple times until the display
reads “All Setup OK”.
Test the program
After programming voice mail, test the
program by placing a call into voice mail
messaging system. Then, press the key
located on the base unit (when in OFF
HOOK position) and dial the pre-
programmed numbering sequence. The
“SECONDS OF WAIT” may need to be
increased if the voice mail was not
retrieved.
VOICE MAIL NO.
12/01
PM
12:00
555-1212
PIN NUMBER
12/01
PM
12:00
- - - - - - - -
SECOND OF WAIT?
12/01
PM
12:00
05
23