Telematrix Spectrum Plus LP550, User Manual

Page: 25 / 52

Programming Flash Timing
Flash timing can be programmed for different timing options listed below.
1. Press the “STORE” key to enter the programming mode.
2. Press the “STORE” key multiple times until the LCD display reads “FLASH
TIME SET”.
3. Enter the flash timing to be stored into memory using the keypad by
pressing the following keys on the keypad in the order shown. The keypad
entry will be displayed on the LCD Screen.
For 100mS press "1" "0" "0" on the keypad.
For 200mS press "2" "0" "0" on the keypad.
For 300mS press "3" "0" "0" on the keypad.
For 400mS press "4" "0" "0" on the keypad.
For 500mS press "5" "0" "0" on the keypad.
For 600mS press "6" "0" "0" on the keypad.
For 700mS press "7" "0" "0" on the keypad.
For 800mS press "8" "0" "0" on the keypad.
For 900mS press "9" "0" "0" on the keypad.
For 1000mS press "1" "0" "0" "0" on the keypad.
4. To exit the program mode, press “DISC” or continue to the end of pro-
gramming by pressing the “STORE” key multiple times until the display
reads “All Setup OK”.
5. To confirm the flash timing programmed in memory, repeat the Store pro-
gramming sequence to see flash timing display.
Programming Example for 100mS
Press “STORE” , Press “STORE” again until LCD reads “FLASH TIME SET”.
Enter digits “100” from the keypad. Press “STORE” to enter the timing into
memory.
25
NOTE: The Flash Timing factory default is 600mS
!
Note: Programming
can only be per-
formed when phone
is on-hook
!