Te/emark TT-6 Power Supply
Figure 4-C
Sweep
Module, Fron
View
2
WEEP
j
tff
-7
l�I
;/ ""
--- LATERAL -
□
1 PATTERN MODE SWITCH
-
The three-position MODE switch is
used to select between SPIRAL, MANUAL beam position, and
TRIANGLE pattern.
6
4
With the MODE switch in the SPIRAL condition, the Longitudinal/Modulation
Frequency knob controls the spiral-collapse frequency, while both Lateral and
Longitudinal Amplitude knobs control the overall size (in two axis). The Joystick is
used to position the beam. The Modulation Amp knob controls the depth of
spiraling collapse (how close the beam moves towards the center of the pattern).
With the MODE switch in the MANUAL beam position setting, the Joystick is used
to position the beam; there is no sweeping.
With the MODE switch in the TRIANGLE setting, the Lateral and Longitudinal
Amplitudes and Frequencies of the beam are set with the corresponding knobs.
The Joystick is used to position the beam. The resulting beam movement is in a
diamond(s) pattern.
2
JOYSTICK
-
Moves the beam size (in two axis -Lateral [left
&
right] and Longitudinal [near
&
far]), or the center position of
patterns.
3&4
axis).
AMPLITUDE
-
Adjusts the overall pattern size (in two
5
&
6
FREQUENCY
-
Adjusts the sweeping speed(s). When in
Triangle mode, the Lateral and Longitudinal Frequency knobs
operate independently (in two axis). When in Spiral mode, only
4-4
CONTROLS AND INDICATORS
