Telekom T-Comfort 630, User Manual

Page: 94 / 120

90 Main Menu Features and MenuCards
of protection (
Internalƒcalls
,
Externalƒcalls
or
Int./ext.ƒcalls
). Confirm your choice with and
activate the function with
On
.
When call protection is activated, the caller hears either the idle
or the busy tone. The system administrator configures this when
configuring user groups.
2ƒCall prot. key
: (call protection key) You can configure
call protection separately for the trunk keys on your telephone,
and switch the signalling of calls for all calls or for internal calls/
external calls only on or off (with the exception of VIP and hunt
group calls). Select the key for which you want to set call protec-
tion. The procedure is the same as for configuring the “Call prot.
phone“ function (see the previous section).
You can also configure call protection for a trunk key by long
pressing the corresponding trunk key and selecting the
5ƒCall protect
menu item.
When call protection is activated, the caller hears either the idle
or the busy tone. The system administrator configures this when
configuring user groups. Calls from direct call keys are only sig-
nalled visually on this trunk key.
Note:
This type of call protection is only activated on the tele-
phone on which it was set. Even if your internal telephone
number is configured on the trunk or team keys of other tele-
phones, call protection is not automatically activated on
those telephones.
3ƒTelephone lock
: enter your user PIN (
PIN:
). Activating
the telephone lock switches your telephone to a lower external
access authorisation level. External dialling may be partly or
fully restricted (emergency numbers can be stored in a special
list assigned to your user group which can always be dialled,
regardless of your external authorisation).
4ƒBaby call
: Enter the destination (
Dest.:
). Activate the
baby call with
On
.
5ƒChange PIN
: Enter your old user PIN then enter your new
PIN twice. Contact your system administrator if you have forgot-
ten your user PIN. Your user PIN can have up to six characters.