Team Functions
Programming the Call Keys
69
Programming the Call Keys
The call keys are configured in the
Configurator
on the
Comfort Pro S/T-Comfort 930 DSL Web console. For
system
telephones
, you can configure the following:
■
the type of key (trunk key, team key, busy key or direct-call
key),
■
the telephone number and the text currently assigned to the
key,
■
the call-signalling mode for this key.
You can change the pre-settings for the text and the call signal-
ling mode on the appropriate key’s MenuCard (see the follow-
ing sections:
MenuCard “Prog. call key“ (Trunk Key)
on
page 69,
MenuCard “Prog. team key“
on page 71, and
Menu-
Card “Prog. busy key“
on page 72) as well as most of the set-
tings for supported features.
If the configuration of a call key is changed in the
Configurator
,
the telephone will load the new settings and not be operational
for a few moments. For more information on the configuration,
refer to the online help of the Comfort Pro S/
T-Comfort 930 DSL.
Press and hold down the trunk key
for a moment, then
select …
1ƒModify text
: You will see the text currently assigned to
the key. This text is displayed on the display of your telephone.
To change the text, press
. Delete the existing text with
the
key and enter new text, if required. Press
and
confirm this with
Save
. If you delete the text, only the key’s call
number will be displayed.
2ƒCall diversion
: You can configure one or more types of
call forwarding for the trunk key (
Immediately
,
After
delay
,
Busy
). Proceed as with programming the “Divert
phone“ function (see the section entitled
MenuCard
MenuCard “Prog. call key“ (Trunk Key)
Summary of Contents for T-Comfort 630
