Telekom T-Comfort 630, User Manual

Page: 75 / 120

Team Functions Programming the Call Keys 71
8ƒCall wait. prot.
: While you are making a call, other
calls for the telephone number of this trunk key are not signalled
by a call waiting tone. The caller hears the busy tone.
Note:
If the internal telephone number of this trunk key is config-
ured on several telephones, call-waiting protection is also
activated on these telephones.
Press and hold down the team key for a moment, then
select …
1ƒModify text
: The text currently assigned to the key is
shown on the display of your telephone. To change the text,
press . Delete the existing text with the key and
enter new text, if required. Press and confirm this with
Save
. If you delete the text, only the key’s telephone number
will be displayed.
2ƒCall signalling
: Determine whether call signalling to
this key is to be
Opticalƒ&ƒacoustic
,
Opticalƒonly
or
Acousticƒafter delay
. If you select
Acoustic after
delay
, specify the number of seconds after which your tele-
phone is to ring.
3ƒCall protect
: Switch call protection
On
or
Off
for all
calls, for internal calls only, or for external calls only. If call pro-
tection has been activated, this team key will only indicate calls
by means of a visual signal, even if they are made from a direct-
call key.
4ƒRing tone
: You can set the
Volume
and
Melody
for dif-
ferent types of incoming calls (
1ƒExternal calls
,
2ƒInternal calls
,
3ƒVIP call
,
4ƒDoor call
)for
each trunk key. Proceed as described in the section “2 Ring
Tone“ on page 87.
5ƒCall wait. prot.
: While you are making a call, other
calls for the telephone number of this team key are not signalled
by a call waiting tone (but at the team keys of other terminals
unless a call waiting protection was programmed there).
MenuCard “Prog. team key“