Telekom T-Comfort 630, User Manual

Page: 44 / 120

40 General Functions Making Calls
call number. If the indicated call number is saved as a phone-
book entry, as usual, the name will be shown along with a ques-
tion mark.
“CNIP” Feature
“CNIP“ is an abbreviation for “Calling Name Identification Pres-
entation“. In addition to the call number, the name configured
by the caller is also transmitted and displayed on the corre-
sponding call key. This assumes that the network provider trans-
mits this information with the connection. If the caller's number
is listed in the Comfort Pro S/T-Comfort 930 DSL telephone
book, then this – local – entry is displayed in preference.
“CLIR” Feature
“CLIR” is an abbreviation for “Calling Line Identification Restric-
tion“. Before dialling a call number, you can decide from
case to case if you wish to prevent your call number
from being displayed to the called subscriber.
To do this,
select
Suppress number
from one of the MenuCards
described in the next section.
If this feature is not provided, your telephone number will always
or never be displayed, depending on the system setting. Con-
sult your system administrator for more information.
When your telephone is in the idle or the connection state, a
short press of MenuCard key provides you with state-
dependent MenuCards displaying frequently used features you
can activate.
Examples
Another telephone in your pick-up group rings, and you want to
answer the call. Lift the handset, press MenuCard key ,
select
Pick-up
and confirm this with . You are now
connected to the caller.
Alternatively, let us assume the line you call is busy and you
want the person with this number to call you back. When you
hear the busy signal, press the MenuCard key and con-
firm
Callback
with .
MenuCards Before and During a Call