manualshive.com logo in svg

Teledyne WORKHORSE, Operation Manual, Page: 138 / 258

Share
Download
Teledyne WORKHORSE Operation Manual Download Page 138

May

 

2015 

WorkHorse H-ADCP Operation Manual 

Page 126 

EAR-Controlled Technology Subject to Restrictions Contained on the Cover Page.

 

 

 

Compass Commands 

The compass calibration algorithm corrects for distortions caused by ferrous material near the H-ADCP to 

give you an accurate measurement. 

Available Compass Commands 

This section lists the available compass commands. 

>a? 
Available Commands: 
 
AC ----------------------- Output Active Fluxgate & Tilt Calibration Data 
AD ----------------------- Display Calibration Data 
AF ----------------------- Field Calibrate to remove Hard and/or Soft Iron Error 
AR ----------------------- Restore Factory Fluxgate Calibration data: 
                              make factory the active calibration data 
AX ----------------------- Examine Compass Performance  
AZ   0.000000 ------------ Zero pressure reading  
A? ----------------------- Display Public Sensor Commands 
 
> 

Compass Command Descriptions 

AC – Output Active Calibration Data 

Purpose 

Outputs active fluxgate and tilt calibration data. 

Format 

AC 

 

Recommended Setting. Use as needed. 

 

Description 

The AC command is identical to the AD command except that the AC command doesn’t 

prompt the user for Factory or Active Calibration data; it assumes active. The AC Com-

mand doesn’t prompt the user to “press any key to continue...” when the screen is full.  

Example 

See below 

>ac 
 
              ACTIVE FLUXGATE CALIBRATION MATRICES in NVRAM 
               Calibration date and time: 4/6/2000  11:00:29 
                             S inverse 
          +                                                  + 
     Bx   ¦   2.8071e-01 -2.8343e-01 -3.8045e-02  1.1574e-02 ¦ 
     By   ¦   8.6383e-04  1.8275e-03 -3.8555e-01  2.9522e-03 ¦ 
     Bz   ¦  -1.3365e-01 -1.2769e-01  4.9614e-03 -2.2870e-01 ¦ 
     Err  ¦   3.5561e-01  3.3613e-01 -6.3830e-04 -3.9550e-01 ¦ 
          +                                                  + 
                             Coil Offset 
                         +                + 
                         ¦   3.4253e+04   ¦ 
                         ¦   3.5362e+04   ¦ 
                         ¦   3.5650e+04   ¦ 
                         ¦   3.3749e+04   ¦ 
                         +                + 
                             Electrical Null 
                              +       + 
                              ¦ 34575 ¦ 
                              +       + 
                    TILT CALIBRATION MATRICES in NVRAM 
                Calibration date and time: 4/6/2000  10:58:42 
              Average Temperature During Calibration was   26.6 °C 
 
                   Up                              Down 
 

Summary of Contents for WORKHORSE



































































































































































































































































Reviews:

No comments