27
Chapter 4: System Setup
4.1
Unpacking the System
During the unpacking, check the system components for possible signs of shipping
damage. If there are any, notify Teledyne Princeton Instruments and file a claim with the
carrier. If damage is not apparent but camera or controller specifications cannot be
achieved, internal damage may have occurred in shipment. Please save the original
packing materials so you can safely ship the camera system to another location or
return it to Teledyne Princeton Instruments for repairs if necessary.
4.2
Checking the Equipment and Parts Inventory
Confirm that you have all of the equipment and parts required to set up the system. A
complete PI-MTE system consists of:
•
Camera
PI-MTE
•
ST-133 Controller
Do not substitute any other controller for the controller supplied with your
system. The System ID numbers on the controller’s and camera’s serial labels
must match.
•
Camera to Vacuum Flange cable
Vacuum-compatible DB25 to DB25, 3 ft.
•
Vacuum Flange to Controller cable:
— 100 kHz/1 MHz system: DB25 to DB25, 6 ft
— 50 kHz/2 MHz system: DB25 to DB25, 3 ft
•
Power cable
•
Vacuum Flange
2¾" with two feed-through pipes with male VCR fittings.
•
Vacuum Flange
4½" with DB25 connectors.
•
Vacuum Open Nose
•
Flexible Hoses
Two 30" stainless steel flexible hoses used to connect camera coolant ports to
vacuum flange. Hoses for more recent systems have female VCR fittings.
•
Vacuum Port Adapter and O-ring
•
USB cable
Five (5) meter cable (6050-0494) is standard.
•
USB 2.0
Native on motherboard or user-provided USB 2.0 Interface Card (Orange Micro
70USB90011 USB2.0 PCI is recommended for desktop computers and the SIIG,
Inc. USB 2.0 PC Card, Model US2246 is recommended for laptop computers).
•
WinView/32 CD-ROM
This CD contains the WinView/32 imaging software and related manuals in PDF
format.
Summary of Contents for Princeton Instruments PI-MTE
