Teledyne Princeton Instruments IsoPlane 81, Manual

Page: 34 / 62

34 IsoPlane
®
81 Imaging Spectrometer System Manual Issue 1
A.2 Power Specifications
All voltages required by the IsoPlane 81 system are generated and delivered by an
external power supply included with each IsoPlane 81 system.
CAUTION!
!
Use of a power supply other than that provided with the
IsoPlane 81 system will void the system warranty. For
specific power supply requirements, contact Teledyne
Princeton Instruments. Refer to Contact Information (in the
Warranty and Service section at the end of this manual) for
complete information.
Refer to Table A-2 for power specifications for the external IsoPlane 81 power supply.
A.3 Environmental Specifications
Refer to Table A-3 for environmental specifications.
NOTE:
The cooling performance may degrade if the room
temperature is above +23°C.
Table A-2: Power Specifications
Parameter
Specification
Units
Minimum Nominal Maximum
Input
Voltage 90 – 246 V
AC
Frequency 47 – 63 Hz
Output
Voltage – 18 – V
DC
Current – – 4.45 A
Power – – 80 W
Table A-3: IsoPlane 81 Environmental Specifications
Parameter
Specification
Minimum Nominal Maximum
Storage Temperature -20°C +55°C
Operating Temperature +5°C +30°C
Operating Ambient Relative Humidity <80% (non-condensing)