Teledyne Princeton Instruments IsoPlane 81, Manual

Page: 31 / 62

Chapter 4 Getting Started 31
Figure 4-14: Typical Sensor Expander
Alternatively, click on to open the Sensor Temperature dialog,
shown in Figure 4-15.
Figure 4-15: Typical Sensor Temperature Dialog
6. Open the Spectrometer expander and program the desired Center Wavelength.
For example, in Figure 4-16, the 1200 g/mm, Blaze: 550 nm Grating has been
factory installed, and the Center Wavelength is programmed to 546 nm for a
mercury (Hg) lamp.
Figure 4-16: Typical Spectrometer Expander
7. Verify that an appropriate incoming light source is installed and turned on.
8. Click to begin data acquisition.