MERIDIAN
UNIVERSAL GAS DETECTOR
CONFIGURATION & SETUP
5-8
USE AND DISCLOSURE OF DATA
Information contained herein is classified as EAR99 under the U.S. Export Administration Regulations. Export, reexport or diversion contrary to U.S. law is
prohibited.
CEC X Info (Com
-
munication Exten
-
sion Card)
Information, cont.
TX
This is a counter that the transmitter increments to count the bytes sent to the
CEC. It is the interface between the transmitter and the CEC.
RX
This is a counter that the transmitter increments to count the bytes received
by the CEC. It is the interface between the transmitter and the CEC.
Sensor X General
SN
Displays the Serial Number.
GasType
Displays the Gas Type.
Gas Units
Displays Gas Units. %, %LEL, PPB, or PPM.
Model#
Displays the Model Number.
Type
Displays the Sensor’s technology type:
1=E-Chem
2=IR
3=Cat Bead
Rev
Displays the firmware revision installed on the Sensor. For example, 1.12.
Sensor X Live
GasConc
Displays gas concentration from the sensor. Displays with or without deci
-
mal points as appropriate.
Volts
Displays the Sensor Voltage.
Temp(C)
Displays the Sensor Temperature in °C.
Gas A/D
Displays the A/D output, the raw count.
Sensor X Cal Dates
Mfg Date
Displays manufactured date. Read from the Sensor.
Install Date Displays installation date. Read from the Sensor.
Prior Date
Displays prior calibration date.
Current Date Displays the most recent calibration date.
Cal Time
Displays the last Cal Time.
Sensor X Cal Info
Cal Factor Displays the resolution of the Sensor.
Cal Temp
Displays the temperature (°C) of Sensor when calibrated.
Zero
Displays A/D reading when zeroed.
Sen Life
Display the sensor current life as %.
Cal Required Displays Yes or No.
* No user access required to access these particular parameters.
Table 5-1: Information Menu Parameters (Continued)
Item
Sub-Item
Description*
