Teledyne 4220, Installation And Operation Manual, Page: 50 / 198

4220 Flow Meter
Section 2 Programming
2-22
Select YES if you want DO/PH to appear in the report. Note that
you must have the appropriate sensor connected to the flow
meter to sense parameters; the flow meter is capable of sensing
temperature, pH and temperature, and D.O. (dissolved oxygen)
and temperature. Press
Enter . The following will appear:
Select YES if you want TEMPERATURE to appear in the report.
Press
Enter again and the display will return to the REPORT
SETUP menu:
FLOW METER HISTORY is just off the screen. Now select YSI
600. The following display will appear:
Press Enter again and the display will return to the REPORT
SETUP menu.
This time select SAMPLE HISTORY. Press Enter . The following
display will appear:
Select YES if you want SAMPLE HISTORY to appear in the
report. Press
Enter again and the display will return to the
REPORT SETUP menu:
This time select FLOW METER HISTORY. Press Enter . The fol-
lowing will appear:
Select YES if you want HISTORY to appear in the report.
HISTORY is a list of the changes that have been made to the flow
meter's program.
TEMPERATURE IN REPORT
• YES • • NO •
REPORT SETUP
• FLOW • • DO/PH • • YSI 600 • • SAMPLE HISTORY •
YSI DATA IN REPORT
• YES • • NO •
REPORT SETUP
• FLOW • • DO/PH • • YSI 600 • • SAMPLE HISTORY •
SAMPLE HISTORY IN REPORT
• YES • • NO •
REPORT SETUP
• DO/PH • • SAMPLE HISTORY • • FLOW METER HISTORY •
FLOW METER HISTORY IN REPORT
• YES • • NO •