Teledyne 4220, Installation And Operation Manual, Page: 187 / 198

4220 Flow Meter
Appendix E Material Safety Data Sheets
E-5
Section 4 – First Aid Measures
Eyes: Rinse the eyes well with water while lifting the eye lids. If irritation persists, consult a
physician.
Skin: Wash affected area with soap and water.
Ingestion: Ingestion is unlikely, this material will pass through the body normally.
Inhalation: Remove the affected person to fresh air and get medical attention if necessary.
Notes to Physician:
Not applicable
Section 5 – Fire Fighting Measures
Flammable Properties: Not flammable
Flash Point:
Not applicable
Method:
Not applicable
Flammable Limits:
Not flammable
Lower Flammability Limit:
Not applicable
Upper Flammability Limit:
Not applicable
Autoignition Temperature:
Not applicable
Hazardous Combustion Products: Not applicable
Extinguishing Media: Use extinguishing media that is appropriate for the surrounding fire. Silica gel is
not combustible.
Fire Fighting Instructions: Not combustible
Unusual Fire and Explosion Hazards: None
Section 6 – Accidental Release Measures
Spill: Sweep or vacuum up and place the spilled material in a waste disposal container. Avoid raising dust.
Wash with soap and water after handling.
Section 7 – Handling and Storage
Handling:
Avoid raising dust and minimize the contact between worker and the material. Practice
good hygienic work practices.
Storage:
Store in a cool, dry location. Keep in sealed containers away from moisture. The silica gel
will readily adsorb moisture.