User Manual — TeleCorder with UpCorder Software —
V 2.17-B-US
21
IX. Notes:
1. Avoid shaking the TeleCorder, and keep it in an environment with moderate temperature and
humidity that is suitable for electronic equipment. Do not expose to rain or moisture.
2. There are no user-serviceable parts inside of the TeleCorder. Refer servicing to qualified
service personnel.
3. In the UpCorder software, there are settings that are stored in the software running on your PC
(for example, ULogFolder location) and settings that are stored in hardware in the TeleCorder
recorder (for example, the VAR settings). Settings that are recorded in the PC software are stored
in the PC registry.
The ULogFolder is one of the software settings that are stored in the PC. Each time UpCorder
software is opened, it will check for the last active ULogFolder. If it can find one, it will place new
recordings into this folder. Otherwise, it will create a new ULogFolder in the location where your
UpCorder software is installed. You can check or change the location of the active ULogFolder
from the “Configure” window. You can also create a new ULogFolder from the Configuration
menu.
If the active ULogFolder is empty, as it will be if you create a new folder, the "View Log"
button will not display an empty log. As soon as new recordings are added to the log, you will see
the list of recordings when “View Log” is selected.
USER NOTES: