User Manual — TeleCorder with UpCorder Software —
V 2.17-B-US
12
1
．
Notes
a.
Settings to the TeleCorder hardware should only be made when there are no active
recordings. To avoid interruption of active recordings, it is recommended that you configure
operating parameters while the recorder is idle. If channels are active when you need to make
hardware setting changes, unplug the input cables and wait for all channels to stop recording
prior to opening the
Configuration
screen and making changes to the settings that are stored
in the TeleCorder hardware.
b.
The TeleCorder hardware listens for outgoing numbers dialed using DTMF/touch-tone
signaling and stores them with the recording. It is possible for it to document and record false
phone numbers, particularly in VAR mode when recording broadcast radio music where the
audio can mimic sounds of dialing. To avoid collecting and recording these erroneous
numbers,
you
can
use
the
Configuration
menu
to
disable
the
storing
of dialed digit signaling.
4. Configuring Software Settings
Using your PC with the UpCorder program running, select
Configure
from the main screen. Click
to
open this screen.
a.
Audio File Format:
If you select the voice data file as
WAV[8bitPCM]
(.wav) format, the program
will use your computer’s default player for playback. This mode is not the recommended mode for either
storage usage or audio quality reason. It is good for voice file compatibility, however, the amount of hard
drive storage space required for each recording will be substantially larger than with
UP
selected.
If you select the
UP
(.up) format, you should further select one of the 4 sub-modes provided by the
hardware referring to page 11 paragraph
f
. The application will use a specified UpPlayer for playback of
the voice file saved in this mode.
