User Manual — TeleCorder with UpCorder Software —
V 2.17-B-US
13
b.
Auto Refresh Recording List:
If you select the
Auto Refresh
option by placing a check mark in
the box as shown below, the
List of Recorded Calls
will be automatically updated every 25
seconds. If this box is not checked, you will need to click the
List Refresh
button on the
List of
Recorded Calls
window for the list to show recordings stored after the list was last opened.
c. DAVA Settings:
If the volume levels of the 2 sides of a conversation are different, or if the line
quality is not well adjusted, the Digital Automatic Volume Adjustment (DAVA) function will
amplify the lower or far side to more closely match the level of the stronger or near side of a
recorded conversation. Since background noise will also be amplified together with the sound,
there will be a compromise to permit weak voices to be played at higher levels without raising
background noise levels to objectionable levels. To enable a small amount of DAVA during
recording, select
L1 (Less)
. For a greater level of DAVA, select
L2 (Deep)
. This option is
available only when you have selected to save
Audio File Format
as
WAV(8bitPCM)
.
d.
Location of PC Folder with Recordings — “ULogFolder”:
The UpCorder software must set a
location on the computer’s hard drive for the UpCorder folder named
ULogFolder
. This is where the
index files and voice files of recorded conversations will be stored. By default, it is set in the application
program folder. You can change its location to a different location by clicking on the
Browse
button to
locate another folder on the local PC hard drive that will be the location of the active ULogFolder. It is the
user’s responsibility to make sure enough free space is available on the PC hard drive for the data files.
You can set the items capacity (number of recordings) as well as space capacity (number of MB
allocated on the hard drive for storing recordings) for the application. To assist in knowing when to backup
or change folder operations, the application
Port Activity Window
will display the ratio your recordings
have reached in regard to your maximum settings. The default values are 2000 items and 500 MB. To
minimize the chance of missing recordings, do not let the items or space capacities reach 100%. Allocate
extra hard drive space, delete some calls, or select a new folder where new recordings will be saved.
e.
Index File Setting “HTML”:
In addition to the binary application index file, named
“UpCorderLog.ULOG”, this selection will generate a HTML index file. This name is changeable. The
default name for it is “ULogTestNew.htm”.
Notice:
1. This file is a must for log viewing so never set it to off (always leave this box checked).
2.
With any recordings already logged, don’t change the name of an existing location.
3. To view the list of recorded calls in the ULogFolder, you can either open this file from
the UpCorder
Configuration
menu or independently use your PC file manager. If opened
using the UpCorder
Configuration
menu, new recordings will also be stored in the selected
folder. If opened with file manager, it will not change where active recordings are stored.
You will be able to play recordings and convert individual files to WAVE files, but will not
have access to UpCorder
File Manager
functions such as Search, Batch Conversion, and
Text Editing.
